「佳木斯快速門」堆積門操作方法及注意事項

 

Operating methods and matters needing attention of "Jiamusi Express Gate" stacking door

 

快速卷簾門怎么用?隨著快速卷簾門進入國內之后，許多企業已經安裝應用，有時也會碰到一些問題，那么如何正常應用快速卷簾門呢?下面小編就為解答快速卷簾門的應用細節。


How to use fast curtain door? With the rapid curtain door entering the country, many enterprises have installed and applied, sometimes encounter some problems, then how to apply fast curtain door normally? The following small edition is to answer the application details of fast curtain door.

快速卷簾門應用細節


Application details of fast curtain door


1、快速卷簾門在操縱應用過程中,操縱職員不得擅自離開操縱地點,應緊密親密留意啟閉情況和執行情況,在啟閉時卷簾底下不準有人站立、走動.以防止行程開關失靈,卷簾卡死,電機受阻和發生其它事故。


1. In the process of operation and application of fast curtain door, the operator should not leave the control site without authorization. Close attention should be paid to the situation of opening and closing and the execution. No one should stand or walk under the curtain when opening and closing to prevent trip switch failure, curtain jamming, motor blocking and other accidents.
 

2、快速卷簾門在應用過程中一旦發明異常情況應立刻采取緊急措施,堵截輸入電源,排除故障。


2. Once abnormal conditions are found in the application of fast shutter doors, urgent measures should be taken immediately to block the input power supply and troubleshoot.
 

3、快速卷簾門應建立按期保養軌制,并做好每樘卷簾的保養記實工作,存案存檔。


3. Fast curtain doors should be maintained on schedule, and do a good job of keeping records of curtains per diaphragm, and keep them on file.


4、長期不啟閉的卷簾半年必需保養一次,內容為消除塵圾,涂刷油漆,對傳動部份的鏈輪滾子鏈加潤滑油生同等。


4. The long-term unclosed rolling curtain must be maintained once a half year. The contents are to eliminate dust and garbage, to paint, and to lubricate the chain roller chain of the transmission part equally.


「佳木斯快速門」堆積門操作方法及注意事項


Operating methods and matters needing attention of "Jiamusi Express Gate" stacking door
 

快速卷簾門有哪幾種控制方法


What are the control methods for fast shutter doors


快速卷簾門現在在各大商場、銀行、廠房等行業需求越來越大，它的實用性、利便性使其受到市場的熱捧。恰是由于快速卷簾門的幾種可控方法讓它贏得了市場的認可。


Fast curtain doors are now in increasing demand in major shopping malls, banks, factories and other industries. Its practicability and convenience make it popular in the market. It is precisely because of several controllable methods of fast curtain door that it has won market recognition.
 

1.遙控器開啟式快速卷簾門。適用經常進出叉車及其它車輛，人員通行的通道門，按壓遙控器即可開門。


1. The remote control opens the fast curtain door. It is suitable for forklift trucks and other vehicles, people's access doors, press the remote control to open the door.


2.雷達開啟式快速卷簾門。適用經常進出叉車及其它車輛，人員通行的通道門，優點：全自動開啟及關閉，無需人員操作只要進入雷達感應區門會自動打開。


2. Radar Open Fast Curtain Door. Applicable to forklift trucks and other vehicles, personnel access doors, advantages: fully automatic opening and closing, no need for personnel operation, as long as access to radar induction area doors will automatically open.


缺點：只要有移動物體通過雷達感應區域時門即打開(指控制手柄在自動檔位時)，當控制手柄在手動檔位置時雷達感應不起作用，此時只有操作按鈕，拉繩開關等操作門的啟閉)。


Disadvantage: As long as a moving object passes through the radar sensing area, the door opens (when the control handle is in the automatic gear). When the control handle is in the manual gear position, the radar induction does not work. At this time, only the operation button, pull rope switch and other operation doors open and close.

 

3.手動按鈕式快速卷簾門。適用經常進出人員的通道門，人員進出門時按下按鈕即可開門。


3. Manual push-button fast curtain door. It is suitable for the passageway door for people who often enter or leave. When people enter or leave the door, they can open the door by pressing a button.


4.手動拉繩式快速卷簾門。適用經常進出叉車及其它車輛，人員通行的通道門，伸出手拉繩即可開門。


4. Manual pulling rope type fast rolling shutter door. It is suitable for forklift trucks and other vehicles, passage doors for people to pass through, and the door can be opened by stretching out the hand rope.


5.光電感應開啟式快速卷簾門。人，車通過裝有光電感應區域時，控制感應電路接收到來自光電的感應信號并指令快速門開啟。優點：無需人員操作全自動開啟及關閉，指控制手柄在自動檔位置時。


5. Photoelectric induction open fast curtain door. When the vehicle passes through the photoelectric induction area, the control induction circuit receives the induction signal from the photoelectric and instructs the fast door to open. Advantages: No manual operation is needed to open and close automatically, and the accusation control handle is in the automatic gear position.
 

6.地磁環開啟式快速卷簾門。當控制箱控制手柄打到自動檔位置時。


6. Geomagnetic Ring Opening Fast Curtain Door. When the control handle of the control box hits the automatic gear position.


只要有金屬物體在地磁感應線圈感應區域通過，如車輛或其它設備，人員推拉金屬車等，門即可自動打開。地磁環感應器的靈敏強度可調。


As long as metal objects pass through the induction area of the geomagnetic induction coil, such as vehicles or other equipment, personnel push and pull metal cars, the door can be opened automatically. The sensitivity of the geomagnetic ring inductor is adjustable.

人員不攜帶金屬物體通過地磁感應區域時門不會打開。當控制手柄在手動檔位置時地磁感應不起作用，此時只有操作按鈕，拉繩開關等操作門的啟閉。


The door will not open when the person does not carry metal objects through the geomagnetic induction area. When the control handle is in the position of the manual gear, the geomagnetic induction does not work. At this time, only the operation button, pull rope switch and other operation doors open and close.


7.聯動互鎖式快速卷簾門。多用于無塵級別較高的廠房門，車間門，通道門的應用。


7. Interlocking fast rolling shutter door. It is mostly used for the application of workshop doors, workshop doors and passage doors with higher dust-free level.

可通過接入自動觸發感應器類裝置來實現門的全自動開啟。如雷達，地磁環感應器，光電感應等。


The automatic opening of the door can be realized by accessing automatic trigger inductor devices. Such as radar, geomagnetic ring inductor, photoelectric induction, etc.