「雞西堆積門」快速門安裝后的門口封閉
Enclosure of "Jixi Stack Gate" Fast Gate after Installation
安裝快速門的場所通常是廠房和地下車庫中,新建和改建的都有,門口環境不一致,「雞西快速門」互鎖式堆積門調試注意事項 ,在安裝和調試結束后,都需要對門口進行封閉和修復工作,當然,因場地而異,作業難度是不同的。
Installation of fast doors is usually located in factories and underground garages. New and reconstructed buildings have different entrance environments. Attentions should be paid to the debugging of interlocking stacking doors of "Zhangjiakou Express Door". After installation and debugging, the doors need to be closed and repaired. Of course, due to the site, the difficulty of operation is not the same. Same.
比較簡略的是加發泡膠,外以反光貼紙,如果縫隙較大,則需要另立方鋼,并用混凝土添堵,重新粉刷墻面,這一般是針對兩側的
Simple is to add foam glue, outside with reflective stickers, if the gap is large, then need another cubic steel, and concrete to plug, re-paint the wall, which is generally aimed at both sides.
而門上方,我們可應用陽光板或者保溫鋁板進行封閉,「雞西快速門」快速門運行時劇烈抖動的原因?,當然要有鋼管骨架才能夠更加牢靠。
And above the door, we can use the sunshine board or thermal insulation aluminum board to close, the reason why the "Tangshan Express Gate" fast door shakes violently when it runs? Of course, steel tube skeleton is needed to be more reliable.
關于快速門的布局,相信大家都不陌生,這里簡略介紹一下好了,首選,它是由門框架系統、電機系統、控制系統等構成。
As for the layout of the express door, I believe everyone is familiar with it. Here is a brief introduction. It is preferred. It is composed of door frame system, motor system, control system and so on.
「雞西堆積門」快速門安裝后的門口封閉
Enclosure of "Jixi Stack Gate" Fast Gate after Installation
門框架系統是門的保護部分,也是門塑形的關鍵。通常門框架系統都是以鋁合金為主,鋁合金質料尤其的輕盈,加在門的周圍有著很好的修飾作用,不僅起到了門的保護作用,同時為門的成型打下了良好的底子。
The door frame system is the protection part of the door and the key of the door shaping. Usually the door frame system is mainly made of aluminium alloy. The aluminium alloy material is especially light. It has a good decoration effect around the door. It not only plays a protective role of the door, but also lays a good foundation for the forming of the door.
快速門的電動機可謂是構成的亮點。電機接納的是大功率,噪聲小,經濟性良好的電機
The motor of the fast door is the highlight of the composition. The motor accepts the motor with high power, low noise and good economy.
不僅在運轉的時候節省電源,同時保障了門的順利運行,大部分的快速門在運行的時候加裝了剎車片,以便于在運行的時候更容易的控制,在動和停之間快速的切換。
Not only saves power in operation, but also ensures the smooth operation of the door. Most of the fast doors are equipped with brake pads when they are running, so that they can be easily controlled during operation and switch between movement and stop quickly.
控制系統是快速門的核心所在,通過控制系統完成在運行的精確控制,控制系統的主要部件有一些細碎的部件,包括編碼器,變頻系統等布局構成。
The control system is the core of the fast door. The precise control of the operation is accomplished by the control system. The main parts of the control system are made up of some small parts, including encoder, frequency conversion system and so on.
控制系統是快速門的中間樞紐,能夠幫助應用者完成自己的應用意圖。
The control system is the middle hub of the express door, which can help the applicant complete his application intention.
對于快速堆積門我們有相當豐富的生成和安裝經驗,并對特殊門口有針對性計劃的能力,期待與您的合作。
We have considerable experience in generating and installing fast stacking doors, and have the ability to plan for special doors. We look forward to cooperating with you.
相關新聞: